Sign In | Join Free | My uabig.com |
|
Brand Name : Huawei
Model Number : S7712
Certification : CE
Place of Origin : China
Model : S7712
Product Name : S7700 Series Smart Gigabit Enterprise Routing POE Network Switch S7712
Function : LACP, SNMP, Stackable, VLAN Support, LACP, Stackable,
Switch Capacity : 4.64 Tbps, 4.64 Tbps
Dimensions (H x Wx D mm) : 663.9,10U *442*517.4
chassis weight : 25kg
Transmission Rate : 10/100/1000Mbps
port Communication Mode : Full-Duplex & Half-Duplex
Forwarding performance : 3480Mpps
MPU Slot : 2
Huawei S7712 S7700 Series Switches original new stock for networking manufacturer
Appearance and Structure
The S7712 chassis is 15 U high (1 U = 44.45 mm). When the chassis has no cable management frame installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 517.4 mm. When the chassis has cable management frames installed, the dimensions (H x W x D) are 663.9 mm x 442 mm x 585 mm.
shows the front view of S7712 chassis structure.
1. Twelve of the following service cards can be installed:
| 2. Two MPUs | 3. A pair of mounting brackets NOTE: The mounting brackets are used to secure the chassis in the cabinet. |
4. Four power modules | 5. Two EH1D200CMU00-Centralized Monitoring Unit | 6. Four PoE power modules
NOTE: For details, see Power Module. |
7. Ground screw NOTE: The ground screw is used to ground the chassis. | 8. Front ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. | 9. Cable management frames NOTE: Cable management frames are used to route cables. |
shows the rear view of S7712 chassis structure.
1. Four Fan Module | 2. Rear ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted into this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. | 3. Air filter NOTE: The air filter prevents dust from entering the chassis. |
4. A pair of removable handles NOTE: You can install these handles on two sides of the chassis to lift the chassis. | - | - |
Mapping between the S7712 chassis and software versions
Chassis | Version |
---|---|
S7712 chassis | V100R003C01 and later versions |
S7712 PoE chassis | V100R003C01 and later versions |
S7712 chassis, FCC certified | V200R003C00 and later versions |
S7712 PoE chassis, FCC certified | V200R003C00 and later versions |
S7712 chassis specifications
Item | Description |
---|---|
LPU slots | 12 |
MPU slots | 2 |
Fan slots | 4 |
System power supply slots | 4 |
PoE power supply slots | 4 |
Maximum port density |
|
Installation | In an N66E or N68E cabinet, one cabinet for one chassis |
CSS | CSS card or service port clustering |
PoE |
|
Maximum power consumption (fully configured, no PoE power supply) NOTE: The heat dissipation value of a chassis equals the current power consumption of the chassis. | 4200 W |
Power specifications |
|
Dimensions (H x W x D, without rack-mounting brackets) |
|
Weight (empty/fully configured) | 25 kg/97 kg (55.1 lb/213.8 lb) |
Reliability and availability |
NOTE: The preceding values are calculated based on the typical configuration of the product. The actual values will vary depending on the modules installed on the product. |
Environment specifications |
|
Noise at normal temperature (acoustic power) | ≤ 72 dB(A) |
Certification |
|
Part number |
|
![]() |
2 MPU LACP Huawei S7712 S7700 Series Switches Original 3480Mpps Images |